D1D101JB49R070M
Evolv® ROC™ Drop Assembly Pushlok® dielectric, 70 m, bulk packaging
General Specifications
| Product Number | D1D101JB49R070M |
| Fibre category | ClearCurve® LBL |
| Cable assembly type | Drop Assemblies |
| Environment | Outdoor |
| Application | FTTH |
| Number of pulling grips | 0 |
| Cable Type | ROC™ dielectric drop |
| Connector Assembly Type | Pushlok to Pushlok |
| Packaging | Bulk Pack |
| Preconnectorized "Stubbed" hardware | Yes |
| Solution | Evolv® |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Design
| Fibre count | 1 |
| Outer jacket colour | Black |
| Fibre Type | Single-mode |
Mechanical Characteristics
| Cold mate/demate | -40 °C |
| Axial pull, plug to cable, through the dust cap | 444.82 N (100 lb) in axial pull with load applied to the dust cap |
Optical Characteristics
| Fibre code | J |
| Performance option code | 22 |
| Fibre category | OS2 |
| Fibre Type | Single-mode (OS2) / 250 µm |
| Fibre name | ClearCurve® LBL |
| Maximum Attenuation | 0.36 dB/km / 0.36 dB/km / 0.22 dB/km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fibre compliance | ITU-T G.652.D and ITU-T G.657.A2/B2 |
| Fibre core diameter | 8.2 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 23 [ps/(nm*km)] |
| Fibre Bend Performance at 1550nm 7.5mm radius | ≤ 0.4 dB/turn |
| Cable cutoff wavelength | 1260 nm |
| Mode-Field Diameter at 1310 nm | 8.6 µm |
| Mode-Field Diameter at 1550 nm | 9.6 µm |
| PMD Link Design Value | ≤ 0.06 ps/√km |
| PMD (Polarization Mode Dispersion) maximum individual fibre | ≤ 0.2 ps/√km |
| Parallel optics 40 gigabit ethernet | 150 m / - |
Specifications - Connector A
| Reflectance, typical | > 65 dB |
| Insertion loss, typical | ≤ 0.15 dB |
| Insertion loss, max. | 0.3 dB |
| Connector type | Pushlok® |
| Ferrule material | Zirconia |
Specifications - Connector B
| Reflectance, typical | > 65 dB |
| Insertion loss, typical | ≤ 0.15 dB |
| Insertion loss, max. | 0.3 dB |
| Connector type | Pushlok® |
| Ferrule material | Zirconia |
Dimensions
| Length | 70 m |
Ordering Information
| Packaging method | Bulk Pack |
Hardened connector technology
Reduced diameter Pushlok™ connector
Reduced optimised cable cross section
Smaller profile and bend radius; flexibility allows for increased slack storage capacity in existing optical network terminals (ONTs), pedestals, and handholes
Robust design
Designed for rapid connection to external flush-mounted bulkhead adapters on terminals or closures
Flexible connector offerings
Dual-ended or pigtailed versions to accommodate any ONT interface; hybrid assemblies with hardened connector (terminal) to SC APC (ONT)
Versatile installation environments
Aerial: dielectric, self-supporting at 40 lbs installation tension at 150 ft (NESC Heavy), 255 ft (NESC Medium) or 330 ft (NESC Light)
Direct-buried: toneable for easy locating
Duct: integral pulling eye/connector cap designed for 100 lb maximum pulling tension; Pushlok connector is suitable for 13 mm inner diameter duct
Direct-buried: toneable for easy locating
Duct: integral pulling eye/connector cap designed for 100 lb maximum pulling tension; Pushlok connector is suitable for 13 mm inner diameter duct