GE5E5K2QLZDDU030M
Trunk EDGE8® MTP® Trunk EDGE8® MTP®
Spécifications générales
| Référence du produit | GE5E5K2QLZDDU030M |
| Fibre category | 50 µm MM (OM4) |
| Cable assembly type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Conditions externes
| Températures, installation | -5 °C - 50 °C |
| Températures, fonctionnement | -10 °C - 60 °C |
| Plage de température, stockage | -25 °C - 70 °C |
Design
| Fibre count | 192 |
| Outer jacket material | LSZH/FRNC |
| Polarity | Universal, TIA-568 type-B |
| Fibre Type | Multimode |
Mechanical Characteristics
| Tensile strength | 440 N |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 240 mm |
| Min. bend radius operation | 80 mm |
Optical Characteristics
| Fibre code | T |
| Performance option code | 98 |
| Fibre category | OM4 |
| Fibre Type | Multimode |
| Fibre name | 50 µm MM (OM4) |
| Maximum Attenuation | 3.8 dB/km / 2.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fibre compliance | IEC 60793-2-10 |
| Fibre core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 gigabit ethernet | 1000 m / 600 m |
| Serial 10 gigabit ethernet | 550 m / - |
| Minimum effective modal bandwidth (EMB) | 4700 MHz*km / - |
| Min. overfilled launch (OFL) bandwidth | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Perte d’insertion, typique | 0,35 dB |
| Perte d’insertion, Max. | 0,35 dB |
| Remarque : | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Câble gainé résistant à la traction | 44 N |
| Résistance | ≤ 0.2 dB changement, 200 réutilisations, FOTP-21 |
| Détrompé (sécurité) | Non |
| Cor do boot | Preto |
| Tipo de conector | MTP® (com pinos) |
| Material do ferrolho | Compósito |
| Cor da carcaça | Verde-água |
| Material da carcaça | Compósito |
| Tipo de boot | Individual |
| Refletância | ≤ -20 dB |
Especificações - Conector B
| Perda por inserção, típica | 0,35 dB |
| Perda por inserção, máx. | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistência à tração do cabo revestido | 44 N |
| Durabilidade | ≤ 0,2 dB de alteração, 200 reacoplamentos, FOTP-21 |
| Codificado (segurança) | Não |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | ≤ -20 dB |
Furcation - Connector A
| Longueur des pattes échelonnées par groupe | 6 |
| Longueur de patte | 840 mm -0 / +140mm |
| Diamètre d'une patte | 2 mm |
| Incrément d'échelonnement | 100 mm |
| Longueur de patte la plus courte (mm) | 840 mm |
| Type de connecteur | Thermorétractable |
| Nombre de pattes | 24 |
| Hauteur de plug | 15 mm |
| Largeur de fiche | 15 mm |
| Profondeur de la prise | 170 mm |
Furcation - Connector B
| Diamètre d'une patte | 2 mm |
| Incrément d'échelonnement | 100 mm |
| Longueur de patte la plus courte (mm) | 840 mm |
| Type de connecteur | Thermorétractable |
| Nombre de pattes | 24 |
| Hauteur de plug | 15 mm |
| Largeur de fiche | 15 mm |
| Profondeur de la prise | 170 mm |
| Longueur des pattes échelonnées par groupe | 6 |
| Longueur de patte | 840 mm -0 / +140mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 52 mm |
Pulling grip - Connector B
| Tensile strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m |
| Outer diameter | 15 mm |
Ordering Information
| Package contents | 2x U-Clip 2nd generation, Test Report |
| Packaging method | Plastic reel |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection