GE7E7K2GLZDDU030M
EDGE8® MTP® Trunk Cable Bend-improved single-mode (OS2 ), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 192F, with 840 mm legs, tool-less pulling grip one side, 30 m
Allgemeine Spezifikation
| Produktnummer | GE7E7K2GLZDDU030M |
| Fibre category | Bend-improved Single-Mode (OS2) |
| Cable assembly type | EDGE8® Trunk |
| Cable Type | Interconnect |
Normas
| Reacción al Fuego | Cca, s1b, d1, a1 |
| RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
| Criterios de diseño y prueba | ANSI/ICEA S-83-596 |
| Intercompatibilidad | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | -5 °C bis 50 °C |
| Temperature range, operation | -10 °C bis 60 °C |
| Temperature range, storage | -25 °C bis 70 °C |
Design
| Fibre count | 192 |
| Outer jacket material | LSZH/FRNC |
| Polarity | Universal, TIA-568 type-A |
| Fibre Type | Single-mode |
Mechanical Characteristics
| Tensile strength | 440 N |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 240 mm |
| Min. bend radius operation | 80 mm |
Specifications - Connector A
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Green |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Polish | APC |
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Green |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | ≤ -65 dB |
Furcation - Connector A
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 52 mm |
Pulling grip - Connector B
| Tensile strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m |
| Outer diameter | 15 mm |
Ordering Information
| Package contents | 2x U-Clip 2nd generation, Test Report |
| Método de embalaje | Carrete de plastico |
| Unidades por entrega | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Tecnología Corning® CleanAdvantage ™ y tapa antipolvo optimizada
Elimina la necesidad de examinar y de limpieza antes de la conexión inicial en el campo