CAXXSM-00104-C002
Module Everon® Datacom cuivre xs500 Cat.6A, Keystone, AWG 26-27, pack unitaire.
General Specifications
| Product Number | CAXXSM-00104-C002 |
| Protection antipoussière | Oui |
| Catégorie | 6A |
| Sans halogène | Oui |
| Bandwidth | 500 MHz |
Standards
| Flame Retardance | Class UL94 V-0 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Transmission Performance Link | Class EA (ISO/IEC 11801 Ed. 2.2 2011), 10 Gigabit Ethernet according to IEEE 802.an |
| Component Standard | IEC 60603-7-51 (Edition 1.0 2010) |
Conditions externes
| Compatibilité avec l'environnement | Recyclage possible, absence de métaux lourds |
| Températures, installation | -40 °C to 70 °C |
Conception
| Type de prise | RJ45 - 8/8 |
| Nombre de pièces | 2 |
| Matériau du boîtier | Métal |
| Diamètre maximal d'isolation | 9 mm |
| Conducteur de fil + diamètre d'isolation max. | 12 mm |
Spécifications mécaniques
| Durabilité du jack RJ45 (PoE) | ≥ 750 Cycles d'accouplement sous charge (52 volts, 860 mA, 90 watts) en conformité avec les paramètres techniques de transmission |
| Durabilité du jack RJ45 | ≥ 750 cycles d'accouplement possibles, EN 186000-1, test 4.5.32 |
| Accès câble | 0° à 360° Contact de blindage et décharge de traction |
| Contacts IDC | Convient aux câbles flexibles AWG 27 - AWG 26 |
| Surface de contact | Tampon d'or dans la zone de contact |
| Reproductibilité | Utilisable plusieurs fois |
| Matériau du boîtier | Métal |
Spécifications électriques
| Input vers output DC Resistance non équilibrée | < 50 MΩ |
| Courant admissible | ≤ 1250 mA (DC) |
| Input vers output DC Resistance | < 200 MΩ |
| Résistance électrique DC (conducteur/conducteur) | ≥ 1000 V DC/AC peak |
| Résistance électrique DC (conducteur/plaque de contrôle) | ≥ 1500 V DC/AC peak |
| Résistance à l'isolation | ≥ 500 MΩ*km |
| Transfert d'impédance | ≤ 200 mΩ at 10 MHz[less-than-or-equal-to-200-mohm-at-10-mhz] |
Dimensions
| Height | 19.6 mm |
| Width | 14.5 mm |
| Depth | 35 mm |
| Weight | 19 g |
Ordering Information
| Shipping Weight | 21 g |
| Units per Delivery | 1/1 |
Fulfils the requirements for the 2 and 4 connector model according to E Class
3-Connector Permanent Link / Channel, certified by independent testing body
Suitable for EA Class applications according to ISO/IEC 11801
Industry standard Keystone dimensions
Compatible with existing Corning LANscape Hardware with an adaptor
Easy and quick installation (2-piece design), no special tool needed
Integrated dust cap (colour coding possible with accessories)
All components are certified as Category 6A according to ISO/IEC 11801
Certified by a vendor-independent and impartial test lab (GHMT AG)
GHMT überwachtes Produkt des
Premium Verification Program (PVP)
Strain-relief without cable tie possible
Tested and approved for Power over Ethernet applications (PoE/PoE+/4PPoE) according to IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt up to 90W