GE7E872GLZDCX030M
EDGE8® MTP® Extender Trunk Cable Biegeoptimierte Singlemode Faser (OS2), 8F MTP Stecker (mit Pins) auf 8F MTP Stecker (ohne Pins), 72-fasrig, mit 840/1500 mm Peitschen, Einziehhilfe auf einer Seite, 30 m
Allgemeine Spezifikation
| Produktnummer | GE7E872GLZDCX030M |
| Fibre category | Bend-improved Single-Mode (OS2) |
| Cable assembly type | EDGE™ Extender Trunk |
| Environment | Indoor |
| Cable Type | Interconnect |
| Pulling grip | Yes |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | 0 °C bis 50 °C |
| Temperature range, operation | -10 °C bis 60 °C |
Design
| Fibre count | 72 |
| Polarity | Universal, TIA-568 type-A |
| Fibre Type | Single-mode |
Mechanical Characteristics
| Nominal outer diameter | 10.5 mm ± 0.3mm |
| Min. bend radius installation | 157.5 mm |
| Min. bend radius operation | 52.5 mm |
Optical Characteristics
| Fibre code | Z |
| Performance option code | 20 |
| Fibre category | OS2 |
| Fibre Type | Single-mode (OS2) / 250 µm |
| Fibre name | Bend-Improved Single-mode (OS2) |
| Maximum Attenuation | 0.34 dB/km / 0.34 dB/km / 0.20 dB/km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fibre compliance | ITU-T G.652.D and ITU-T G.657.A1 |
| Fibre core diameter | 8.2 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 22 [ps/(nm*km)] |
| Cable cutoff wavelength | 1260 nm |
| Mode-Field Diameter at 1310 nm | 9.2 µm |
| Mode-Field Diameter at 1550 nm | 10.4 µm |
| PMD Link Design Value | ≤ 0.04 ps/√km |
| PMD (Polarization Mode Dispersion) maximum individual fibre | ≤ 0.1 ps/√km |
Specifications - Connector A
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing material | Composite |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot colour | Black |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
| Reflectance | ≤ -65 dB |
Kabelaufteilung - Stecker A
| Peitschenlänge | 840 mm -0 / +76mm |
| Kabelaufteilertyp | EDGE™ Größe 2 (20 mm x 20 mm x 108,6 mm) |
| Kabelpeitschenfarbe | Gelb |
| Aufteilerdurchmesser | 2 mm |
| Kabelpeitschenanzahl | 9 |
| Steckerhöhe | 20 mm |
| Steckerbreite | 20 mm |
| Steckertiefe | 108,6 mm |
Kabelaufteilung - Stecker B
| Kabelaufteilertyp | EDGE™ Größe 2 (20 mm x 20 mm x 108,6 mm) |
| Kabelpeitschenfarbe | Gelb |
| Aufteilerdurchmesser | 2 mm |
| Kabelpeitschenanzahl | 9 |
| Peitschenlänge | 1500 mm -0 / +76mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 56 mm |
Pulling grip - Connector B
| Min. Duct Size Diameter | 89 mm |
Dimensions
| Length | 30 m |
Ordering Information
| Package contents | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Packaging method | Plastic reel |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection