

GE7E896GLZDCX030M
EDGE8® MTP® Extender Trunk Bend-improved Single-mode (OS2), 8F MTP (pinned) Connector to 8F MTP (non-pinned) Connector, 96F, with 33/60 in legs, tool-less pulling grip one side, 100 ft
通用规范
产品编码 | GE7E896GLZDCX030M |
Fiber Category | Bend-improved Single-Mode (OS2) |
Cable Assembly Type | EDGE8® Extender Trunk |
Environment | Indoor |
Cable Type | Interconnect |
Pulling grip | Yes |
Brand | EDGE8 |
Standards
Reaction to Fire | Cca, s1b, d1, a1 |
RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Design and Test Criteria | ANSI/ICEA S-83-596 |
Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
Temperature Range, Installation | 0 °C - 50 °C (32 °F - 122 °F ) |
Temperature Range, Operation | -10 °C - 60 °C (14 °F - 140 °F ) |
Design
Fiber Count | 96 |
Polarity | Universal, TIA-568 Type-A |
Fiber Type | Single-mode |
Mechanical Specifications
Nominal Outer Diameter | 11.9 mm ± 0.3mm |
Min. Bend Radius Installation | 178.5 mm |
Min. Bend Radius Operation | 59.5 mm |
Optische Eigenschaften
Fasercode | Z |
Leistungsklassen-Code | 20 |
Faserkategorie | OS2 |
Fasertyp | Single-mode (OS2) / 250 µm |
Fasername | Singlemode (OS2), biegeoptimiert |
Maximale Dämpfung | 0,34 dB/km / 0,34 dB/km / 0,20 dB/km |
Wellenlänge | 1310 nm / 1383 nm / 1550 nm |
Faserkonformität | ITU-T G.652.D und ITU-T G.657.A1 |
Faserkerndurchmesser | 8,2 µm |
Mantelglasdurchmesser | 125 µm |
Coating-Durchmesser | 242 µm |
Dispersion bei 1550 nm | ≤ 18 [ps/(nm*km)] |
Dispersion bei 1625 nm | ≤ 22 [ps/(nm*km)] |
Kabel-Grenzwellenlänge | 1260 nm |
Modenfelddurchmesser bei 1310 nm | 9,2 µm |
Modenfelddurchmesser bei 1550 nm | 10,4 µm |
PMD (Polarisationsmodendispersion) Link Design Wert | ≤ 0,04 ps/√km |
Maximale Polarisationsmodendispersion (PMD) der einzelnen Faser | ≤ 0,1 ps/√km |
Specifications - Connector A
Insertion Loss, Max. | 0.35 dB |
Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
Boot Color | Black |
Connector Type | MTP® (pinned) |
Ferrule Material | Composite |
Reflectance | ≤ -65 dB |
Specifications - Connector B
Insertion Loss, Max. | 0.35 dB |
Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
Boot Color | Black |
Connector Type | MTP® (non-pinned) |
Ferrule Material | Composite |
Furcation - Connector A
Leg Length | 840 mm -0 / +76mm |
Furcation Type | EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm |
Leg Color | Yellow |
Leg Diameter | 2 mm |
Leg Count | 12 |
Plug Height | 20 mm |
Plug Width | 20 mm |
Plug Depth | 108.6 mm |
Furcation - Connector B
Furcation Type | EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm |
Leg Color | Yellow |
Leg Diameter | 2 mm |
Leg Count | 12 |
Leg Length | 1500 mm -0 / +76mm |
Pulling Grip - Connector A
Pulling grip | Yes |
Tensile Strength | 440 N |
Grip Outer Diameter | 56 mm |
Pulling Grip - Connector B
Min. Duct Size Diameter | 89 mm |
Dimensions
Length | 30 m |
Ordering Information
Package Contents | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
Packaging Method | Plastic reel |
Units per Delivery | 1/1 |
Einfach einrastbare Zugentlastungsclips
Einfacheres Kabelmanagement
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Verlustarme Verbindungen
Ermöglichen flexibles Systemdesign
Biegeunempfindliche Fasern
Ermöglicht engere Kabelbiegungen für Kabelführung und Überlängenablage, geringeres Risiko von Ausfallzeiten durch eingeklemmte oder geknickte Kabel
Corning® CleanAdvantage™ Technologie und optimierte Staubschutzkappen
Visuelle Inspektion und Reinigung vor der ersten Feldverbindung sind nicht nötig