GE7E896GLZDCX030M
EDGE8® MTP® Extender Trunk Bend-improved Single-mode (OS2), 8F MTP (pinned) Connector to 8F MTP (non-pinned) Connector, 96F, with 33/60 in legs, tool-less pulling grip one side, 100 ft
Especificaciones generales
| Número del producto | GE7E896GLZDCX030M |
| Categoría de la fibra | SM con curvatura mejorada (OS2) |
| Tipo de montaje del cable | Tronco extensor EDGE™ |
| Ambiente | Interno |
| Tipo de cable | Interconectar |
| Alza para tracción | Si |
| Brand | EDGE8® |
Normas
| Reacción al Fuego | Cca, s1b, d1, a1 |
| RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
| Criterios de diseño y prueba | ANSI/ICEA S-83-596 |
| Intercompatibilidad | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | 0 °C a 50 °C (32 °F a 122 °F ) |
| Temperature Range, Operation | -10 °C a 60 °C (14 °F a 140 °F ) |
Diseño
| Número de fibras | 96 |
| Polaridad | Universal, TIA-568 Tipo-A |
| Tipo de fibra | Monomodo |
Especificaciones mecánicas
| Diámetro externo nominal | 11,9 mm ± 0,3mm |
| Radio mínimo de curvatura de instalación | 178,5 mm |
| Radio mínimo de curvatura de funcionamiento | 59,5 mm |
Specifications - Connector A
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Reflectance | ≤ -65 dB |
Furcation - Connector A
| Leg Length | 840 mm -0 / +76mm |
| Furcation Type | EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm |
| Leg Color | Yellow |
| Leg Diameter | 2 mm |
| Leg Count | 12 |
| Plug Height | 20 mm |
| Plug Width | 20 mm |
| Plug Depth | 108.6 mm |
Furcation - Connector B
| Furcation Type | EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm |
| Leg Diameter | 2 mm |
| Leg Length | 1500 mm |
Alza de tracción - Conector A
| Alza para tracción | Si |
| Resistencia a la tracción | 440 N |
| Diámetro externo de la alza | 56 mm |
Alza de tracción - Conector B
| Diámetro mínimo del conducto | 89 mm |
Dimensions
| Length | 30 m |
Informaciones del pedido
| Método de embalaje | Carrete de plastico |
| Contenido del embalaje | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Unidades por entrega | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
抗弯曲光纤
允许更紧的余长存储和理线光缆弯曲，减少由于光缆被挤压和弯曲而造成的宕机风险
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection