DE5E5U8QLZDDU030M
EDGE8® MTP® Trunk Cable 50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 288F, with 840 mm legs, pulling grip both sides, 30 m
General Specifications
| Product Number | DE5E5U8QLZDDU030M |
| Fibre category | 50 µm MM (OM4) |
| Cable assembly type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | -5 °C to 50 °C |
| Temperature range, operation | -10 °C to 60 °C |
| Temperature range, storage | -25 °C to 70 °C |
Design
| Fibre count | 288 |
| Outer jacket material | LSZH/FRNC |
| Fibre Type | Multimode |
Mechanical Characteristics
| Tensile strength | 440 N |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 330 mm |
| Min. bend radius operation | 110 mm |
光学特性
| 光纤代码 | T |
| 性能选项代码 | 98 |
| 光纤类别 | OM4 |
| 光纤类型 | 多模 |
| 光纤名称 | 50 µm 多模 (OM4) |
| 最大衰减 | 3.8 dB/km / 2.0 dB/km |
| 波长 | 850 nm / 1300 nm |
| 光纤符合性 | IEC 60793-2-10 |
| 光纤纤芯直径 | 50 µm |
| 包层直径 | 125 µm |
| 涂层直径 | 242 µm |
| 穿行1G 以太网 | 1000 m / 600 m |
| 串行10 Gigabit 以太网 | 550 m / - |
| 最小有效模式带宽(EMB) | 4700 MHz*km / - |
| 最小满注发射(OFL)带宽 | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | ≤ -20 dB |
Specifications - Connector B
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Reflectance | ≤ -20 dB |
Furcation - Connector A
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 36 |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 36 |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
| Grip Outer Diameter | 52 mm |
Pulling grip - Connector B
| Pulling grip | Yes |
| Tensile strength | 660 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m |
| Outer diameter | 17.4 mm |
Ordering Information
| Package contents | 2x U-Clip 2nd generation, Test Report |
| Packaging method | Plastic reel |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
小外径
改善缆盘填充比例并可以增强空气流动
Low-loss connectivity
Enables system design flexibility
抗弯曲光纤
允许更紧的余长存储和理线光缆弯曲，减少由于光缆被挤压和弯曲而造成的宕机风险
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection