G899072GPNCDX100F
EDGE™ MTP® Trunk Bend-improved single-mode (OS2), MTP® Connector to MTP Connector, 72 fibres, with 33/60 inch legs, pulling grip one side, 100 ft
You might also be interested in
General Specifications
| Product Number | G899072GPNCDX100F |
| EAN Code | 4056418687001 |
| Flame rating | Plenum (OFNP) |
| Fibre category | Bend-improved Single-Mode (OS2) |
| Cable assembly type | EDGE™ Trunk |
| Environment | Indoor |
| Cable Type | Indoor: ANSI/ICEA S-83-596 |
| Pulling grip | Yes |
| Connector Assembly Type | MTP to MTP |
Standards
| Fibre Standards | ITU-T G.652.D and ITU-T G.657.A1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Approvals and Listings | NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6 |
Environmental Conditions
| Temperature range, operation | -10 °C to 60 °C (14 °F to 140 °F ) |
Design
| Fibre count | 72 |
| Polarity | Extender, TIA-568 type-A |
| Fibre Type | Single-mode |
Mechanical Characteristics
| Nominal outer diameter | 10.5 mm |
| Max. tensile strength for installation | 660 N |
| Min. bend radius installation | 157.5 mm |
| Min. bend radius operation | 52.5 mm |
| Minimum conduit size with 18-in elbow | 77 mm |
光学特性
| 光纤代码 | Z |
| 性能选项代码 | 01 |
| 光纤类别 | OS2 |
| 光纤类型 | Single-mode (OS2) / 250 µm |
| 光纤名称 | 抗弯单模 (OS2) |
| 最大衰减 | 0.4 dB/km / 0.4 dB/km / 0.3 dB/km |
| 波长 | 1310 nm / 1383 nm / 1550 nm |
| 光纤符合性 | ITU-T G.652.D和ITU-T G.657.A1 |
Specifications - Connector A
| Insertion loss, max. | 0.35 dB |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Reflectance | < -65 dB |
Specifications - Connector B
| Insertion loss, max. | 0.35 dB |
| Boot colour | Black |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
| Reflectance | < -65 dB |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 56 mm |
Pulling grip - Connector B
| Min. Duct Size Diameter | 89 mm |
Dimensions
| Length | 100 ft |
| Cable Weight | 95 kg/km |
Ordering Information
| Packaging method | Plastic reel |
| Reel diameter | 23.5 in |
| Reel width | 5 in |
| Units per delivery | 1/1 |
Furcation - Connector A
| Leg Length | 1524 mm -0 / +76mm |
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Yellow |
| Leg diameter | 2 mm |
| Leg count | 6 |
Furcation - Connector B
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Yellow |
| Leg diameter | 2 mm |
| Leg count | 6 |
| Leg Length | 838 mm -0 / +76mm |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
抗弯曲光纤
允许更紧的余长存储和理线光缆弯曲，减少由于光缆被挤压和弯曲而造成的宕机风险
Fiber optic trunk cable manufactured with Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection
Non-pinned MTP connectors on both ends
Fiber optic trunks designed to interface with the EDGE solutions or Plug & Play™ systems modules