text.skipToContent text.skipToNavigation

DE5E5U8TLZDDU030M

EDGE8® MTP® Trunk  50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 288F, with 840 mm legs, tool-less pulling grip both sides, 30 m

Trouvez votre distributeur Délais de livraison à reception de la commande
Spécifications générales
Référence du produit DE5E5U8TLZDDU030M
Catégorie de fibre optique 50 µm MM (OM3)
Type d'assemblage de câble Trunk EDGE8®
Type de câble Interconnecter
Normes
Comportement au Feu Cca, s1b, d1, a1
RoHS Ne contient aucune substance dangereuse au sens de la directive RoHS 2011/65/EU
Critères de conception et de test ANSI/ICEA S-83-596 
Compatibilité TIA/EIA-604-5 / TIA/EIA-604-5
Environmental Conditions
Temperature Range, Installation -5 °C  -  50 °C    (23 °F  -  122 °F    )
Temperature Range, Operation -10 °C  -  60 °C    (14 °F  -  140 °F    )
Temperature Range, Storage -25 °C  -  70 °C    (-13 °F  -  158 °F    )
Conception
Nombre de fibres 288
Matériau de la gaine externe LSZH/FRNC
Type de fibre Multimode
Caractéristiques mécaniques
Résistance à la traction 440 N
Résistance à la compression (réversible) 1000 N/10 cm
Rayon de courbure minimal à l'installation 330 mm
Rayon de courbure minimal en fonctionnement 110 mm
Optical Characteristics
Fibre code T
Performance option code 88
Fibre category OM3 
Fibre Type Multimode
Fibre name 50 µm MM (OM3)
Maximum Attenuation 3.8 dB/km / 2.0 dB/km
Wavelengths 850 nm / 1300 nm
Fibre compliance IEC 60793-2-10
Fibre core diameter 50 µm
Cladding diameter 125 µm
Coating diameter 242 µm
Serial 1 gigabit ethernet 750 m / 600 m
Serial 10 gigabit ethernet 300 m / -
Minimum effective modal bandwidth (EMB) 2000 MHz*km / -
Min. overfilled launch (OFL) bandwidth 1500 MHz*km / 500 MHz*km
Specifications - Connector A
Insertion Loss, Typical 0.35 dB
Insertion Loss, Max. 0.35 dB
Note: *IL in preconnectorized products is measured in the factory through two mated pairs.
Tensile Strength Jacketed Cable 44 N
Durability ≤ 0.2 dB change, 200 rematings, FOTP-21
Keyed (security) No
Boot Color Black
Connector Type MTP® (pinned)
Ferrule Material Composite
Housing Color Aqua
Housing Material Composite
Boot Type Individual
Reflectance ≤ -20 dB
Specifications - Connector B
Insertion Loss, Typical 0.35 dB
Insertion Loss, Max. 0.35 dB
Note: *IL in preconnectorized products is measured in the factory through two mated pairs.
Tensile Strength Jacketed Cable 44 N
Durability ≤ 0.2 dB change, 200 rematings, FOTP-21
Keyed (security) No
Couleur du boot Noir
Type de connecteur MTP® (mâle)
Matériau de la férule Composite
Couleur Boîtier Turquoise
Matériau du boîtier Composite
Type de boot Individuel
Réflectance ≤ -20 dB
Furcation - Connector A
Staggering Legs per Group
Leg Length 840 mm   -0 / +140mm
Leg Diameter 2 mm
Staggering Increment 100 mm
Shortest Staggering Leg Length (mm) 840 mm
Plug Type Heat Shrink
Leg Count 36
Plug Height 17.4 mm
Plug Width 17.4 mm
Plug Depth 170 mm
Furcation - Connector B
Leg Diameter 2 mm
Staggering Increment 100 mm
Shortest Staggering Leg Length (mm) 840 mm
Plug Type Heat Shrink
Leg Count 36
Plug Height 17.4 mm
Plug Width 17.4 mm
Plug Depth 170 mm
Staggering Legs per Group
Leg Length 840 mm   -0 / +140mm
Pulling Grip - Connector A
Poignée de tirage Oui
Résistance à la traction 440 N
Diamètre minimal de la conduite 980 mm
Diamètre extérieur de la poignée 52 mm
Pulling Grip - Connector B
Poignée de tirage Oui
Résistance à la traction 660 N
Diamètre minimal de la conduite 980 mm
Dimensions
Longueur 30 m
Diamètre extérieur 17,4 mm
Informations pour commander
Contenu du colis 2x U-Clip 2nd generation, Test Report
Méthode d'emballage Touret en plastique
Unités par livraison 1/1
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables

Corning® CleanAdvantage™ technology and optimised dust cap

Eliminates the need for scoping and cleaning prior to initial field connection