JE2E908QEZ-NA003M
EDGE8® MTP® PRO Jumper 8F, 50 µm multimode (OM4), MTP PRO X (pinned) to MTP PRO X (non-pinned), LSZH, TIA-568 Type-A polarity, no pulling grip, 3 M
You might also be interested in
General Specifications
| Product Number | JE2E908QEZ-NA003M |
| Flame Rating | LSZH/FRNC |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE8 Jumper |
| Environment | Indoor |
| Cable Type | Interconnect |
| Assembly Insertion Loss | ≤ 0.35 dB |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | 0 °C to 50 °C (32 °F to 122 °F ) |
| Temperature Range, Operation | -10 °C to 60 °C (14 °F to 140 °F ) |
| Temperature Range, Storage | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 8 |
| Polarity | TIA-568 Type-A |
| Fiber Type | Multimode |
Mechanical Specifications
| Minimum Bend Radius | 17 mm (0.67 in) |
| Nominal Outer Diameter | 2 mm (0.08 in ) |
| Max. Tensile Strength for Installation | 220 N (49.46 lbf) |
| Crush Resistance | 350 N/10 cm |
| Min. Bend Radius Installation | 30 mm (1.18 in) |
| Min. Bend Radius Operation | 10 mm (0.39 in) |
Caractéristiques optiques
| Code de la fibre | T |
| Code d'option de performance | 98 |
| Catégorie de fibre optique | OM4 |
| Type de fibre | Multimode |
| Nom de la fibre | 50 µm MM (OM4) |
| Atténuation maximale | 2,8 dB/km / 1,0 dB/km |
| Longueurs d'onde | 850 nm / 1300 nm |
| Conformité aux normes | IEC 60793-2-10 |
| Diamètre du cœur | 50 µm |
| Diamètre de gaine | 125 µm |
| Diamètre du revêtement primaire | 242 µm |
| Longueur de transmission pour 1 Gigabit Ethernet | 1000 m / 600 m |
| Longueur de transmission pour 10 Gigabit Ethernet | 550 m / - |
| EMB (Minimum Effective Modal Bandwidth) | 4700 MHz*km / - |
| Bande OFL (Min. Overfilled Launch) | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Polish | APC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 40 N (8.99 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Black |
| Ferrule Material | Composite |
| Boot Type | Individual |
| Reflectance | < -45 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 40 N (8.99 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Black |
| Ferrule Material | Composite |
| Boot Type | Individual |
| Reflectance | < -20 dB |
Dimensions
| Length | 3 m (9.84 ft) |
| Cable Weight | 9 kg/km (6.05 lb/1000 ft) |
Ordering Information
| Packaging Method | Cardboard box |
| Units per Delivery | 1/1 |
| Shipping Height | 180 mm (7.09 in) |
| Shipping Width | 250 mm (9.84 in) |
| Shipping Depth | 380 mm (14.96 in) |
Câble à cable à Fibres Interconnecter
Améliore le flux d'air et réduit la congestion
MTP® PRO Connecteurs
Permet les changements d'épingle et de polarité sur le terrain
Fibre avec meilleure courbure
Permet un meileur rangement et routage des fibres, diminue le risque de temps d'arrêt dû à des câbles pincés ou courbés
Technologie Corning® CleanAdvantage™ et protections optimisées
Élimine le besoin de test visuel et de nettoyage avant l'installation