text.skipToContent text.skipToNavigation

G937596TPNCDX100F

EDGE™ MTP® Extender Trunk  96F, 50 µm multimode (OM3), 100 ft

通用规范
产品编码 G937596TPNCDX100F
EAN Code 4056418688459
Flame Rating Plenum (OFNP)
Fiber Category 50 µm MM (OM3)
Cable Assembly Type EDGE™ Trunk
Environment Indoor
Application Data Center LAN/SAN 
Connector Assembly Type MTP to MTP
Standards
Reaction to Fire Cca, s1b, d1, a1
RoHS Free of hazardous substances according to RoHS 2011/65/EU
Approvals and Listings NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6 
Environmental Conditions
Temperature Range, Operation -10 °C  -  60 °C    (14 °F  -  140 °F    )
Design
Fiber Count 96
Polarity Extender, TIA-568 Type-A
Fiber Type Multimode
Mechanical Specifications
Nominal Outer Diameter 11.9 mm 
Max. Tensile Strength for Installation 660 N
Min. Bend Radius Installation 178.5 mm
Min. Bend Radius Operation 59.5 mm
Minimum Conduit Size with 18-in Elbow 77 mm
光学特性
光纤代码 T
性能选项代码 80
光纤类别 OM3 
光纤类型 多模
光纤名称 50 µm 多模 (OM3)
最大衰减 2.8 dB/km / 1.0 dB/km
波长 850 nm / 1300 nm
光纤符合性 IEC 60793-2-10
光纤纤芯直径 50 µm
穿行1G 以太网 1000 m / 600 m
串行10 Gigabit 以太网 300 m / -
最小有效模式带宽(EMB) 2000 MHz*km / -
最小满注发射(OFL)带宽 1500 MHz*km / 500 MHz*km
Specifications - Connector A
Insertion Loss, Max. 0.25 dB
Boot Color Black
Connector Type MTP® (pinned)
Ferrule Material Composite
Reflectance < -20 dB
Specifications - Connector B
Insertion Loss, Max. 0.25 dB
Boot Color Black
Connector Type MTP® (non-pinned)
Ferrule Material Composite
Reflectance < -20 dB
Pulling Grip - Connector A
Pulling grip Yes
Tensile Strength 440 N
Grip Outer Diameter 56 mm
Pulling Grip - Connector B
Min. Duct Size Diameter 89 mm
Dimensions
Length 100 ft
Cable Weight 111 kg/km
Ordering Information
Packaging Method Plastic reel
Reel Diameter 23.5 in
Reel Width 5 in
Units per Delivery 1/1
Furcation - Connector A
Leg Length 1524 mm   -0 / +76mm
Furcation Type EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm
Leg Color Aqua
Leg Diameter 2 mm
Leg Count 8
Furcation - Connector B
Furcation Type EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm
Leg Color Aqua
Leg Diameter 2 mm
Leg Count 8
Leg Length 838 mm   -0 / +76mm
Snap-in strain-relief clips
Provide easier cable management
小外径
改善缆盘填充比例并可以增强空气流动
Low-loss connectivity
Enables system design flexibility
抗弯曲光纤
允许更紧的余长存储和理线光缆弯曲,减少由于光缆被挤压和弯曲而造成的宕机风险

Corning® CleanAdvantage™ technology and optimized dust cap

Eliminates the need for scoping and cleaning prior to initial field connection