00T212ZB4D3E010M-P
Evolv® Multifiber Pushlok™ Assembly Multifiber Pushlok™ Male pigtail, 12 fibers, SST Drop Dielectric, 10 m, individual packaging
General Specifications
| Product Number | 00T212ZB4D3E010M-P |
| Fiber Category | G.652.D |
| Cable Assembly Type | Multifiber Assembly |
| Environment | Outdoor |
| Cable Type | SST-Drop™ dielectric |
| Packaging | Individual Pack |
| Termination | One end |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Environmental Conditions
| Temperature Range, Installation | -30 °C to 70 °C (-22 °F to 158 °F ) |
| Temperature Range, Operation | -40 °C to 70 °C (-40 °F to 158 °F ) |
| Temperature Range, Storage | -40 °C to 70 °C (-40 °F to 158 °F ) |
Design
| Fiber Count | 12 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal, TIA-568 Type-B |
| Fiber Type | Single-mode |
Mechanical Specifications
| Nominal Outer Diameter | 4.6 mm (0.18 in ) |
| Max. Tensile Strength, Short-Term | 1300 N (292.25 lbf) |
| Max. Tensile Strength, Long-Term | 400 N (89.92 lbf) |
| Max. Tensile Strength for Installation | 1300 N (292.25 lbf) |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 92 mm (3.62 in) |
| Min. Bend Radius Operation | 40 mm (1.57 in) |
| Cold Mate/Demate | -40 °C (-40 °F) |
| Axial Pull, Plug to Cable, Through the Dust Cap | 222.41 N (50 lb) in axial pull with load applied to the dust cap |
Specifications - Connector A
| Polish | APC |
| Insertion Loss, Max. | 0.35 dB |
| Tensile Strength Jacketed Cable | 44 N (9.89 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Black |
| Connector Type | No connector |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Max. | 0.35 dB |
| Tensile Strength Jacketed Cable | 44 N (9.89 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Black |
| Connector Type | Multifber Pushlok |
| Ferrule Material | Composite |
| Housing Color | Green |
| Boot Type | Individual |
Furcation - Connector A
| Leg Length | 1000 mm -0 / +70mm (39.37 in -0 / +2.76in) |
| Furcation Type | Heat Shrink |
| Leg Color | Yellow |
| Plug Type | Heat Shrink |
| Leg Count | 1 |
| Plug Height | 6 mm (0.24 in) |
| Plug Width | 6 mm (0.24 in) |
| Plug Depth | 31.75 mm (1.25 in) |
Furcation - Connector B
| Furcation Type | Heat Shrink |
| Leg Color | Yellow |
| Plug Type | Heat Shrink |
| Leg Count | 1 |
| Plug Height | 6 mm (0.24 in) |
| Plug Width | 6 mm (0.24 in) |
| Plug Depth | 31.75 mm (1.25 in) |
Pulling Grip - Connector B
| Grip Outer Diameter | 0.48 in |
Dimensions
| Length | 10 m (32.8 ft) |
Ordering Information
| Package Contents | 2 trunk holders, test report |
| Units per Delivery | 1/1 |