text.skipToContent text.skipToNavigation

EDGE8® MTP® Extender Trunk

EDGE8® MTP® extender trunks provide additional distance for the backbone of the EDGE8 solution. With a non-pinned MTP connector on one end, a pinned MTP connector on the other, and TIA-568 Type-A polarity, these trunks are designed to interface with an EDGE8 solutions universal module and an EDGE8 MTP trunk. All extender trunks are manufactured with Corning® CleanAdvantage™ and shipped with strain-relief clips to allow easy tool-less installation. MTP extender trunks are most often used in a zone distribution area (ZDA).

Armored

Fiber Count 48

Fiber Category

Products

Product Number	Product Name
GE5E648QADDCX100F	EDGE8® MTP® Armored Extender Trunk, 48F, MTP (pinned) to MTP (non-pinned) with 33 inch/60 inch legs, 50 µm multimode (OM4), straight-through extender polarity, pulling grip on one end, 100 ft	Product Specifications
GE5E648QPNDCX100F	EDGE8® MTP® Extender Trunk, 48F, MTP (pinned) to MTP (non-pinned) with 33 inch/60 inch legs, 50 µm multimode (OM4), straight-through extender polarity, pulling grip on one end, 100 ft	Product Specifications
GE5E648TPNDCX100F	EDGE8® MTP® Extender Trunk Cable, 50 µm multimode (OM3), 8F MTP Connector to 8F MTP Connector, 48F, with 33/60 in legs, tool-less pulling grip one side, 100 ft	Product Specifications
GE7E848GADDCX100F	EDGE8® MTP® Armored Extender Trunk, 48F, MTP (pinned) to MTP (non-pinned) with 33 inch/60 inch legs, Bend-improved single-mode (OS2), straight-through extender polarity, pulling grip on one end, 100 ft	Product Specifications
GE7E848GPNDCX100F	EDGE8® MTP® Extender Trunk, 48F, MTP (pinned) to MTP (non-pinned) with 33 inch/60 inch legs, Bend-improved single-mode (OS2), straight-through extender polarity, pulling grip on one end, 100 ft	Product Specifications