DMA8F1FDD1NC100M0P
Evolv® Terminal mit Pushlok® Stecker Technologie 8 Anschlüsse, vorkonfektioniert, SST dielektrisch, 100 m
General Specifications
| Product Number | DMA8F1FDD1NC100M0P |
| Produkttyp | Terminals / Verteilergehäuse |
| Einsatzgebiet | Außen |
| Kabeltyp | SST flaches dielektrisches Drop-Kabel |
| Faserkategorie | ITU-TG.652.D (OS2) |
| Verpackung | Einzelverpackung |
| Vorkonfektionierte Hardware | Nein |
| Vorkonfektionierter Kabeltyp | SST Drop-Kabel |
| Montageart | Tragseilmontage, Mastmontage, Wandmontage, Sockelmontage, Schachtmontage |
| Spleißmöglichkeit | Nein |
| Anwendung | Glasfaser bis zum Gebäude (FTTP) |
| Technologie | Pushlok |
Normen
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
| Design und Testkriterien | IP68 |
Umgebungsbedingungen
| Temperaturbereich, Betrieb | -40 °C to 85 °C |
| Temperaturbereich, Lagerung | -40 °C to 85 °C |
Design
| Abschließbar | Nein |
| Faseranzahl | 8 |
| Eingehende Faseranzahl | 8 |
| Faserfarben | Blau, orange, grün, braun, grau, weiß, rot, schwarz |
| Fasern pro Port | 1 |
| Anzahl Einzelfaser-Ports, SC APC Stecker | 8 |
| Gehäusematerial | Kunststoff |
| Pigtaillänge | 100 m |
| Eingangskabeltyp | SST flaches dielektrisches Drop-Kabel |
| Dichtungsart | Geschweißt |
| Gehäusefarbe | Schwarz |
| Pigtailtyp | Dielektrisch |
| Faseranzahl des Eingangskabels | 8 |
| Portzahl | 8 |
Design - Kupplung
| Kupplungstyp | Pushlok |
Mechanische Eigenschaften
| Mechanische Steckverbindung | -40 °C |
| Kabellänge | 100 m |
| Eingangskabellänge | 100 m |
Optische Eigenschaften - Anschlusstechnik
| Max. Moduleinfügedämpfung | 0,5 dB |
| Rückflussdämpfung, maximal | > 65 dB |
Eigenschaften Stecker
| Polierung | APC |
| Gehäusefarbe | Schwarz |
| Gehäusematerial | Kunststoff |
Eigenschaften - Stecker A
| Steckertyp | Pushlok |
| Gehäusefarbe | Schwarz |
| Polierung | APC |
| Gehäusematerial | Kunststoff |
| Endflächentyp | APC |
| Einfügedämpfung, max. | 0.50 dB |
| Rückflussdämpfung | > 65 dB |
| Einfügedämpfung, typisch | 0,15 dB |
Eigenschaften - Stecker B
| Einfügedämpfung, max. | 0.50 dB |
Abmessungen
| Höhe | 30 mm |
| Breite | 134 mm |
| Tiefe | 152 mm |
| Gewicht | 4,5 kg |
Bestellinformationen
| Verpackung | Karton |
| Stück pro Liefereinheit | 1/1 |
| Verpackungshöhe | 762 mm |
| Verpackungsbreite | 762 mm |
| Verpackungstiefe | 152 mm |
Pushlok™ cable assembly connector ports for customer drop terminations
Lower installation cost and increased speed of connection
Standard and integrated splitter terminal options Durability
Solution supports various architecture types
Durability
100 lb cable tensile strength
Available stubbed or preterminated with OptiTip® multifiber connector technology
Compatible with existing FlexNAP™ installations
Small form factor optimizes space in pedestals/handholes
Lower profile overall with drop entry ports on bottom
Ultrasonically welded housing
Eliminates water ingress potential and prevents unwanted entry in the field
Factory-terminated polished connectors
Eliminates loss associated with excess fusion splices