

GE5E696QLZDCX030M
EDGE8® MTP® Extender Trunk Cable 50 µm Multimode (OM4), 8F MTP Stecker (mit Pins) auf 8F MTP Stecker (ohne Pins), 96-fasrig, mit 840/1500 mm Peitschen, Einziehhilfe auf einer Seite, 30 m
General Specifications
Product Number | GE5E696QLZDCX030M |
Faserkategorie | 50 µm MM (OM4) |
Konfektionstyp | EDGE™ Verlängerungs-Trunkkabel |
Einsatzgebiet | Innen |
Kabeltyp | Verbindungskabel |
Einzugshilfe | Ja |
Marke | EDGE8® |
Normen
Brandverhalten | Cca, s1b, d1, a1 |
RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
Design und Testkriterien | ANSI/ICEA S-83-596 |
Kompatibilität | TIA/EIA-604-5 / TIA/EIA-604-5 |
Umgebungsbedingungen
Temperaturbereich, Installation | 0 °C to 50 °C |
Temperaturbereich, Betrieb | -10 °C to 60 °C |
Design
Faseranzahl | 96 |
Polarität | TIA-568 Typ-A |
Fasertyp | Multimode |
Mechanische Eigenschaften
Nominaler Außendurchmesser | 11,9 mm ± 0,3mm |
Min. Biegeradius, Installation | 178,5 mm |
Min. Biegeradius, Betrieb | 59,5 mm |
Optical Characteristics
Fiber Code | T |
Performance Option Code | 98 |
Fiber Category | OM4 |
Fiber Type | Multimode |
Fiber Name | 50 µm MM (OM4) |
Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
Wavelengths | 850 nm / 1300 nm |
Fiber Compliance | IEC 60793-2-10 |
Fiber Core Diameter | 50 µm |
Cladding diameter | 125 µm |
Coating diameter | 242 µm |
Serial 1 Gigabit Ethernet | 1000 m / 600 m |
Serial 10 Gigabit Ethernet | 550 m / - |
Minimum Effective Modal Bandwidth (EMB) | 4700 MHz*km / - |
Min. Overfilled Launch (OFL) Bandwidth | 3500 MHz*km / 500 MHz*km |
Eigenschaften - Stecker A
Einfügedämpfung, max. | 0,35 dB |
Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
Knickschutztüllenfarbe | Schwarz |
Steckertyp | MTP® (mit Pins) |
Ferrulenmaterial | Kunststoff |
Gehäusematerial | Kunststoff |
Rückflussdämpfung | ≤ -20 dB |
Eigenschaften - Stecker B
Einfügedämpfung, max. | 0,35 dB |
Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
Knickschutztüllenfarbe | Schwarz |
Steckertyp | MTP® (ohne Pins) |
Ferrulenmaterial | Kunststoff |
Rückflussdämpfung | ≤ -20 dB |
Kabelaufteilung - Stecker A
Peitschenlänge | 840 mm -0 / +76mm |
Kabelaufteilertyp | EDGE™ Größe 2 (20 mm x 20 mm x 108,6 mm) |
Kabelpeitschenfarbe | Türkis |
Aufteilerdurchmesser | 2 mm |
Kabelpeitschenanzahl | 12 |
Steckerhöhe | 20 mm |
Steckerbreite | 20 mm |
Steckertiefe | 108,6 mm |
Kabelaufteilung - Stecker B
Kabelaufteilertyp | EDGE™ Größe 2 (20 mm x 20 mm x 108,6 mm) |
Kabelpeitschenfarbe | Türkis |
Aufteilerdurchmesser | 2 mm |
Kabelpeitschenanzahl | 12 |
Peitschenlänge | 1500 mm -0 / +76mm |
Einzugshilfe - Stecker A
Einzugshilfe | Ja |
Zugkraft | 440 N |
Einzugshilfen-Außendurchmesser | 56 mm |
Einzugshilfe - Stecker B
Min. Rohr-/ Kabelkanaldurchmesser | 89 mm |
Abmessungen
Länge | 30 m |
Bestellinformationen
Packungsinhalt | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
Verpackung | Kunststoffspule |
Stück pro Liefereinheit | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection