DE5E5E4QLZDDU030M
EDGE8™ MTP® Trunk EDGE8™ MTP® Trunk
Especificaciones generales
| Número del producto | DE5E5E4QLZDDU030M |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | -5 °C a 50 °C (23 °F a 122 °F ) |
| Temperature Range, Operation | -10 °C a 60 °C (14 °F a 140 °F ) |
| Temperature Range, Storage | -25 °C a 70 °C (-13 °F a 158 °F ) |
Design
| Fiber Count | 144 |
| Outer Jacket Material | LSZH/FRNC |
| Fiber Type | Multimode |
Mechanical Specifications
| Tensile Strength | 440 N (98.92 lbf) |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 210 mm (8.27 in) |
| Min. Bend Radius Operation | 70 mm (2.76 in) |
Specifications - Connector A
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | * Il in pre-connectorized products is measured in the factory though two mated pairs*Dämpfung bei vorkonfektionierten Produkten wird bei der Herstellung durch zwei getestete Paare gemessen.*IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N (9.89 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -20 dB |
Specifications - Connector B
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N (9.89 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -20 dB |
Furcation - Connector A
| Staggering Legs per Group | 5 |
| Leg Length | 840 mm -0 / +140mm (33.07 in -0 / +5.51in) |
| Leg Diameter | 2 mm (0.08 in) |
| Staggering Increment | 100 mm (3.94 in) |
| Shortest Staggering Leg Length (mm) | 840 mm (33.07 in) |
| Plug Type | Heat Shrink |
| Leg Count | 18 |
| Plug Height | 13.4 mm (0.53 in) |
| Plug Width | 13.4 mm (0.53 in) |
| Plug Depth | 170 mm (6.69 in) |
Furcation - Connector B
| Leg Diameter | 2 mm (0.08 in) |
| Staggering Increment | 100 mm (3.94 in) |
| Shortest Staggering Leg Length (mm) | 840 mm (33.07 in) |
| Plug Type | Heat Shrink |
| Leg Count | 18 |
| Plug Height | 13.4 mm (0.53 in) |
| Plug Width | 13.4 mm (0.53 in) |
| Plug Depth | 170 mm (6.69 in) |
| Staggering Legs per Group | 5 |
| Leg Length | 840 mm -0 / +140mm (33.07 in -0 / +5.51in) |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
| Grip Outer Diameter | 52 mm |
Pulling Grip - Connector B
| Pulling grip | Yes |
| Tensile Strength | 660 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m (98.4 ft) |
| Outer Diameter | 13.4 mm (0.53 in) |
Ordering Information
| Package Contents | 2x U-clip 2nd generation, test report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Tecnologia CleanAdvantage ™ da Corning® e tampa contra poeira otimizada
Elimina a necessidade de delimitação e limpeza antes da conexão de campo inicial