

GE2E272QLZDDU020M
EDGE8® MTP® Trunk 50 µm multimode (OM4), 8F MTP PRO X (pinned) Connector to 8F MTP PRO X (pinned) Connector, 72F, with 840 mm legs, tool-less pulling grip one side, 20 M
General Specifications
Product Number | GE2E272QLZDDU020M |
Flame Rating | LSZH/FRNC |
Fiber Category | 50 µm MM (OM4) |
Cable Assembly Type | EDGE8® Trunk |
Environment | Indoor |
Application | Data Center LAN/SAN |
Cable Type | Interconnect |
Brand | EDGE8® |
Standards
Reaction to Fire | Cca, s1b, d1, a1 |
RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Design and Test Criteria | ANSI/ICEA S-83-596 |
Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Condiciones ambientales
Rango de temperatura, instalación | 0 °C to 50 °C (32 °F to 122 °F ) |
Rango de temperatura, funcionamiento | -10 °C to 60 °C (14 °F to 140 °F ) |
Rango de temperatura, almacenamiento | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
Fiber Count | 72 |
Outer Jacket Material | LSZH/FRNC |
Polarity | Universal, TIA-568 Type-B |
Fiber Type | Multimode |
Mechanical Specifications
Tensile Strength | 440 N |
Nominal Outer Diameter | 11.3 mm ± 0.3mm |
Crush Resistance | 1000 N/10 cm |
Min. Bend Radius Installation | 226 mm |
Min. Bend Radius Operation | 113 mm |
Especificaciones - Conector A
Pulido | APC |
Pérdida por inserción, típica | 0,35 dB |
Pérdida por inserción, máxima | 0,35 dB |
Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
Resistencia a la tracción del cable revestido | 44 N |
Durabilidad | ≤ 0,2 dB de cambio, 200 reacoplamientos, FOTP-21 |
Codificado (seguridad) | No |
Boot Color | Black |
Connector Type | MTP PRO X® (pinned) |
Ferrule Material | Composite |
Housing Color | Green |
Housing Material | Composite |
Boot Type | Individual |
Reflectance | < -20 dB |
Specifications - Connector B
Polish | APC |
Insertion Loss, Typical | 0.35 dB |
Insertion Loss, Max. | 0.35 dB |
Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
Tensile Strength Jacketed Cable | 44 N |
Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
Keyed (security) | No |
Color del boot | Negro |
Tipo de conector | MTP PRO X® (pinned) |
Ferrule Material | Ceramic |
Housing Color | Green |
Housing Material | Composite |
Boot Type | Individual |
Reflectance | < -20 dB |
Furcación - Conector A
Piernas escalonadas por grupo | 6 |
Longitud de la pierna | 840 mm -0 / +840mm |
Tipo de furcación | EDGE™ tamaño 2, 20 mm x 20 mm x 108,6 mm |
Color de la pierna | Verde agua |
Diámetro de la pierna | 2 mm |
Incremento del escalonamiento | 100 mm |
Longitud menor de las piernas escalonadas (mm) | 840 mm |
Tipo de clavija | Tamaño 2 EDGE™ |
Número de piernas | 9 |
Altura de la clavija | 20 mm |
Anchura de la clavija | 20 mm |
Profundidad de la clavija | 108,6 mm |
Furcación - Conector B
Tipo de furcación | EDGE™ tamaño 2, 20 mm x 20 mm x 108,6 mm |
Color de la pierna | Verde agua |
Diámetro de la pierna | 2 mm |
Incremento del escalonamiento | 100 mm |
Longitud menor de las piernas escalonadas (mm) | 840 mm |
Tipo de clavija | Tamaño 2 EDGE™ |
Número de piernas | 9 |
Altura de la clavija | 20 mm |
Anchura de la clavija | 20 mm |
Profundidad de la clavija | 108,6 mm |
Piernas escalonadas por grupo | 6 |
Longitud de la pierna | 840 mm -0 / +840mm |
Pulling Grip - Connector A
Pulling grip | Yes |
Tensile Strength | 440 N |
Grip Outer Diameter | 54 mm |
Pulling Grip - Connector B
Tensile Strength | 440 N |
Min. Duct Size Diameter | 89 mm |
Dimensions
Length | 20 m |
Weight | 94 kg |
Ordering Information
Package Contents | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
Packaging Method | Plastic reel |
Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection