ZE5E548QLZDDU015M
EDGE8® MTP® Trunk 50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 48F, with 840 mm legs, no pulling grip, 15 m
通用规范
| 产品编码 | ZE5E548QLZDDU015M |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE8® Trunk |
| Application | Data Center LAN/SAN |
| Cable Type | Interconnect |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
Condiciones ambientales
| Rango de temperatura, funcionamiento | -10 °C - 60 °C (14 °F - 140 °F ) |
Diseño
| Número de fibras | 48 |
| Polaridad | Universal, TIA-568 Tipo-B |
Especificaciones mecánicas
| Diámetro externo nominal | 8,5 mm ± 0,3mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 98 |
| Fiber Category | OM4 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM4) |
| Maximum Attenuation | 3.8 dB/km / 2.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 1000 m / 600 m |
| Serial 10 Gigabit Ethernet | 550 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 4700 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 3500 MHz*km / 500 MHz*km |
Especificaciones - Conector A
| Pérdida por inserción, máxima | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Color del boot | Negro |
| Tipo de conector | MTP® (con pines) |
| Material de la férula | Compuesto |
| Reflectancia | ≤ -20 dB |
Especificaciones - Conector B
| Pérdida por inserción, máxima | 0,35 dB |
| Color del boot | Negro |
| Tipo de conector | MTP® (con pines) |
| Material de la férula | Compuesto |
| Reflectancia | ≤ -20 dB |
Furcación - Conector A
| Longitud de la pierna | 840 mm -0 / +76mm |
| Tipo de furcación | EDGE™ tamaño 2, 20 mm x 20 mm x 108,6 mm |
| Color de la pierna | Verde agua |
| Diámetro de la pierna | 2 mm |
| Número de piernas | 6 |
| Altura de la clavija | 20 mm |
| Anchura de la clavija | 20 mm |
| Profundidad de la clavija | 108,6 mm |
Furcación - Conector B
| Tipo de furcación | EDGE™ tamaño 2, 20 mm x 20 mm x 108,6 mm |
| Color de la pierna | Verde agua |
| Diámetro de la pierna | 2 mm |
| Número de piernas | 6 |
| Altura de la clavija | 20 mm |
| Anchura de la clavija | 20 mm |
| Profundidad de la clavija | 108,6 mm |
| Longitud de la pierna | 840 mm |
Pulling Grip - Connector A
| Pulling grip | No |
Dimensiones
| Longitud | 15 m |
Ordering Information
| Package Contents | 2x-edge-tm-clip-size2-single-stack-2x-edge-clips-size2-double-stack-2x-edge-u-clips-size2 |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection