Mandrel and Calibration Shuttle
The mandrels and calibration shuttles are propelled through the ducts by compressed air. They enable the tube diameters to be checked and ensure that there is no ovalization of the tubes after they are buried. The calibration can be carried out using special shuttles, called calibration shuttles, which have three sets of calibration disks. The device can also be attached to a standard shuttle, allowing both calibration and cable drawing to be carried out simultaneously.
Mandrin d’étalonnage
Products
| Product Number | Product Name | |
|---|---|---|
| S45254-L103-A28 | Mandrin et furet de calibrage | |
| S45254-L103-A30 | Mandrin et furet de calibrage | |
| S45254-L103-A31 | Mandrin et furet de calibrage | |
| S45254-L103-A32 | Mandrel and Calibration Shuttle, Calibrarion Shuttle 97x100 | |
| S45254-L103-A40 | Mandrin et furet de calibrage | |
| S45254-L104-A1 | Mandrin et furet de calibrage | |
| S45254-L104-A2 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 30x33 | |
| S45254-L104-A3 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 42x45 | |
| S45254-L104-A5 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 47x50 | |
| S45254-L104-A6 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 55x60 | |
| S45254-L104-A7 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 75x80 | |
| S45254-L104-A8 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 97x100 | |
| S45254-L104-A9 | Mandrel and Calibration Shuttle, Calibrarion Mandrel 103x110 |